CHANGING THE MOTOR
1. Open the awning around 50cm.
2. Securely bind the awning.
Rope at three different positions
to ensure safety during the motor
change.
3. Extend the awning slightly more to
make the fabric loose.
4. Remove the end cap of awning & slide out the old motor.
5. Slide the new motor into position & refit the end cap
6. Pair the remote and motor (see pairing instructions)
7. Retract the awning and press the stop button before the awning fully cassettes.
(At this time the motor limit is incorrect, so you must use stop button).
8. Loosen the ropes.
9. Set the close limit (Rotate direction:
“↑” ”－”) around 8 rotations to
avoid the awning retracting too
much (see motor limit adjustment).
10. Using the remote extend the
awning and set the extension limit
